Skip to content
Welcome to BQdeals
Welcome to BQdeals

Solar Ultrasonic Animal Repeller

by BQDEALS
$32.99
Solar animal repeller 

1. The product uses an infrared pyroelectric sensor. The sensitivity of the sensor to the animal is related to the direction of motion. It is not sensitive to radial motion response and sensitive to cross-cut motion. It is that means: If the animal is stationary or straight line moves to the product, without cross-cutting, the infrared is not sensed, and the product cannot work on the animal.
2. It uses the principle of infrared, when it detects small animals and sends ultrasound to drive off small animals. It protects your property, garden and courtyard from harassment by nasty stray dogs, stray cats and other small animals.

Due to it is a portable design product, it can be installed in your home, garden, or anywhere in the courtyard. This product can be used with a low-voltage power supply. This product is only used to drive animals without any chemicals. It emits ultrasonic frequency. They will not be harmful to the human body when the animals expelled.

  • Speaker: This product can emit high frequency to drive away animals.
  • PIR motion detector: This is an infrared sensor that continuously outputs signals. When it senses that a moving animal is in the detection range, it will automatically emit sound waves to drive the animals and the LEDs will light up.
  • When the infrared sensor senses that the animal is far away, the LED indicator will automatically turn off.
  • The product adds new flash and sound, frequency adjustment, sensitivity adjustment function, driving animals will be more targeted and better.
Shift frequency adjustment

0 mode : OFF
1st mode: 13.5KHZ-19.5KHZ, mainly for animals such as mice, dogs, rabbits, foxes, baboons, etc.
2 mode: 19.5KHZ-24.5KHZ, mainly for cats, raccoons, cockroaches, stinky and other animals.
3 mode: 24.5KHZ-45.5KHZ, mainly for bats, birds, mice and other animals.
4 mode: LED strong flash, can drive raccoons, snakes, boars, crickets and other animals.
5 mode: LED lights burst 5.50KHZ, the whole band drives animals and lights flash strobe. All functions work at the same time, the frequency works in turn 1st level to the fifth level, and is accompanied by a strong flash of LED.

Operation instructions

- Powerful ultrasound to drive animals. When the animal enters the area, the infrared sensor detector is triggered and the product emits ultrasonic waves that make the animal feel uncomfortable and escape from the area.
- LED strong flash to drive the animals. When the animal enters the area, the infrared sensor detector is triggered and the product emits a strong LED flash that causes the animal to be scared and flee the area.

Function instructions

- "Sensitivity" button (left): Sensitivity and sensing distance are adjustable. Rotate the knob clockwise to increase the range of protection.
- "Frequency" button (right): This button is used to adjust the ultrasonic frequency. Rotate the knob clockwise and the ultrasonic frequency gradually increases.
Installation notes

  • Open the battery cover on the back, install 3 AA rechargeable batteries, and close the battery cover. (Battery is included as standard, this step can be omitted)
  • Place the product in the area that needs to be protected. (such as flower beds or walls, etc.)
  • Please choose a suitable orientation to ensure that the top solar panels can absorb solar energy to a large extent.
  • If the product is installed underground, insert the grounding rod carefully into the soil. Please insert the grounding rod to the ground about 12cm. It is recommended that the ground be dug well before inserting the product carefully to protect the product from damage.
  • The product can be inserted in the soil and can be hung on the wall or placed in other flat locations.

 

Parameter

Infrared sensing angle: 110
Sensing distance: 8-9 meters, depending on the size of the animal. (The larger the animal, the farther it is.)
Power supply: solar powered, 3*AA rechargeable battery, or powered by a 5V 500mA adapter
The product works when the adapter is linked, but Infrared induction detector does not work.
In case of long-term rainy weather, you can use the adapter to charge
Red LED lights up: product senses animals

 

About the battery
  • If the battery has not been used for a long time (1 month), the battery may run out. It is recommended to use the battery fully charged 3-5 times before it can be used normally.
  • After the battery has been used for a certain period of time, the life will change and it will be filled quickly. Please replace the battery at this time.
  • If the battery cannot be used for a long time, please replace 3 AA 1.2V rechargeable batteries. (Ni-Cd or Ni-MH) The better the battery quality, the better theelectric quantity and the better the effect.
  • Please hand over the unused batteries to the local recycling center. Please consult the relevant local authorities for details.
Precautions

Sometimes humans can have some ultrasound perception. Please keep the product away from the living area. Please do not place products in areas where infants and children are active
Please do not block the infrared sensor detector. When cleaning the product, clean it with a soft cloth and soap. Please do not use chemicals or corrosive objects to clean the product to prevent damage.

Frequently Bought Together